Reproduction Z31 300zx Interior trim is here

<img class="alignnone size-medium wp-image-792" src="http://xenonzcar.com/store/wp-content/uploads/2018/07/35145918_1800042596727649_2725582466470379520_o-300x225.jpg" alt="" width="300" height="225" />

Want to clean up your engine bay?

Get a set of our Z31 Block off plates. These Intake Manifold Block-Off Plates from Z31Parts are specifically designed to allow you to remove your AAR, IACV and EGR Valve from the stock Z31 Upper Intake Plenum. Removing these items will make for a cleaner, easier to maintain engine bay during motorsport competition. In addition, you will also receive our Exhaust Side EGR Delete Plug Installation will require shorter bolts than stock and are not provided with kit. This kit is intended for off-road use only.

Do you know we also are a Full Service Shop for your Z car?

Over the Years of running just a website we have been asked many times where can I have work done to my Z. After not being able to provide a good reliable place to send Z car owners in the North Eastern part of the US We are opening up shop to provide this service. As of the Fall, 2017 XenonZcar Garage (Melnick's Autoworks LLC) is open for business to further support the Z car community with a place they cans trust to work on their Z cars. With 30 plus years of experience of working on the Z car chassis cars and specializing in the S30, S130, Z31 models we have become the place to go for your Z needs in the North East.

Z31 Interior Reproduction Trim

XenonZcar Is happy to be able to offer these excellent replacement trim pieces for the Z31 Models. These items consist of a thin, white, substrate to which a finish of your choice, is overlaid. Then the white lettering is actually the exposed substrate after being routered. Each has a self-adhesive, peel off backing. You will

3000GT fuel rails on a Z31?

As I been continuing my build I found that the DSM  Mitsubishi 3000GT/Dodge Stealth uses a fuel rail with 11mm injectors with the perfect spacing for the Z31 manifold. This will allow you to upgrade to the more common 11mm style injectors rather than trying to source hard to find bosh barb type injectors. With

Z31 Pass Through Motor Mount

When I was Building my Z31 I was having an issue with the stock S-Pipe slipping off the turbo and causing issues with letting un-metered air into the intake system and this was causing a rich running condition. The Stock S-Pipe is also one of the most restrictive areas of the Z31 Stock intake system.

200 ZR

In 1985 The 200ZR was Created and was the last of the Z cars to have a straight six engine. Nissan dropped the L-series motors and instead used the RB20DET motor in the 200ZR. The RB20DET is a Inline-6 2000cc Twin Cam Electronic fuel injected Inter-cooled Single Turbo and is the same motor used in

Welcome to the XenonZcar.com Store

Here you will be able to buy reproduction and our custom parts for the Fairlady Z.